In order to transmit the handlebar’s maneuvers to the street as precise as possible you need a perfect chain of components. BÜGELHALTER completes Lightweight uncompromising vision of the ultimate racing cycle. Developed and tested under the most extreme conditions, this stem withstands even heaviest loads and thus improves safety significantly. Its layer structure is specifically designed for each individual size to keep weight at a minimum while providing maximum safety.

WEIGHT： 110 g Stem 100 mm (including mounting parts)
SIZES (IN MM)： 80 / 90 / 100 / 110 / 120 / 130
STEERER CLAMP： 28,6mm
HANDLEBAR CLAMP： 31,8 mm
BOLTS： Titan
MAX. TORQUE： 4,5 Nm
ANGLE： +/- 6°
MAX. SYSTEM WEIGHT： 120 kg

• Matching combination together with our handlebars and our URGESTALT frame
  
• Individual layer construction for highest technical requirements, safety and comfort.
  
• EFBE tested stem for highest safety.
  
• Common diameters for bar and steerer clamp for high compatibility.
  
• Wide range of sizes for highest flexibility.
  
• Compatible with all current handlebars and forks.
  

Lightweight is a worldwide leading company for high-quality cycling products made of carbon. The company develops and produces in Friedrichshafen at Lake Constance.The most important product group of the premium brand Lightweight is highly specialised, handcrafted race bicycles made of carbon that are regarded as market benchmarks in terms of technology, innovation and functionality all over the world and win tests on a regular basis. Since 2016, Lightweight has also been offering high-quality race bicycle clothing with the fine material collection.

Made in German

Angle: 6°

Stack High: 40mm

Clamp Width: 40mm

Color: Matt-Black w/ Red

Weight: 110g

Introducing the new Darimo IX2 stem, the perfect stem for your mountain or road bike with a weight of just 66 grams in 100 mm length.

The stem is manufactured in a single piece from unidirectional and bidirectional carbon fabrics. It has a careful construction and lamination that allow to reduce weight maintaining vertical and torsional stiffness. The front part has an integrated cap, non-removable, with the two screws on the bottom which gives a perfect aesthetic.

Like all our products, each stem is laminated by hand, then the exact number of carbon layers whith correct direction are placed at each stem point.

In combination with carbon, M4 titanium screws are used with a bigger head to prevent damages during the assembly. The small nuts are made with anodized 7075 aluminum.

Finishes: 3K Gloss, 3K matte, UD matte, UD gloss (the UD finish may have small voids due to the difficulty of air flow and a weight gain of 3-4 grams).

Weight limit: The Darimo stem is safe and exceeds the tests of ISO 4210-2, but it is not recommended for riders over 90 kg. Request the reinforced version if necessary.

Uses: Road, x-cross, MTB.

Clamping diameter: 31.8mm

Angles: -6º, -12º, -17º y -25º

Lengths: 60-70-80-90-100-110-120-130mm

Steering diameters: 1-1/8″ and 1-1/4″ oversize version.

Clamping width: 46mm

Stack height: 46mm

Road handlebar compatibility: Darimo Ellipse. Not compatible with aero handlebar (wider at top zone) We will inform you if we found more handlebars compatible with the stem just ask us.

We continue increasing the range of options according to the users demands. Ask us the measure you need.

Materials:

-Body: Unidirectional and bidirectional carbon fibre fabrics.

-Nuts: Anodized 7075 T6 aluminum.

-Bolts: Ti Gr5 M4.

Weight (+-3%):

60mm-57g           70mm-59g         80mm-61g       90mm-63g

100mm-66g        110mm-70g       120mm-74g     130mm-78g

Why that shape?:

Why we produce a stem with not round section? Why not square?
It is not an arbitrary decision, it’s an engineered design.
After many computational finite elements analysis (FEA) we have manufactured the power with the perfect cross section.

The external dimensions allows an adequate alignment of the fiber with the handlebar and steering tuve. We have shown that a power with square-circular section (square with rounded edges), at equal weight, is torsionally stiffer and the stress is reduced by 20% compared to a perfectly square or round section. Therefore we have achieved the combination that provides the stiffer and lightness possible. The following graph shows the results of the analyses performed. We do not choose the shape, engineering chooses it.

Instructions:

The IX2 with only two bolts stem can be used with our Ellipse Road Handlebar. In the next link or video at bottom of the page you can see how to asemble both products together:

Azonic is the cult brand from the 90IGERN. For many years, this Azonic For Most durable components, and superior build quality to make quick changes Standard equipment for the best riders all over the world. And even today Azonic does everything you need to make sure that every new line to this Believe day away. To work with the top of today's Ridern together to understand what you need and the limits of from early to beyond the threshold.

Features:

CNC-machined 6061 T6 aluminium

Laser Etched logos

31.8 mm handlebar clamp

1 1/8 Shaft clamp

50 & - 60 mm Length

Stack height: 40 mm.

5 ° pitch

Net Weight: 113g

An often overlooked, yet critical visual point is the stem cap. We held nothing back creating our stem caps and are proud to offer Star Capz in all your favorite Supacaz colors. Let the star guide you.

• 100% Powder Coated Aluminum
• Laser Etched
• Supalite

An often overlooked, yet critical visual point is the stem cap. We held nothing back creating our stem caps and are proud to offer Star Capz in all your favorite Supacaz colors. Let the star guide you.

• 100% Powder Coated Aluminum
• Laser Etched
• Supalite